pvcstrip.com hardware is fabricated from heavy gauge galvanized steel with integral flush-mounted studs for ease of installation and is available in many styles: Wall Mount, Jamb Mount, Slide Mount, Pipe Mount, and Stand-off Mount. Combine multiple lengths of hardware for wider door openings. Hardware can be cut to length with a band saw or hacksaw.

Wall Mount hardware is designed to be installed above the doorway on the wall. Wall mount is the most commonly used hardware type because it allows the strip door to extend past the opening so that a positive seal is achieved between the outer most strips and the wall. The hardware includes an appropriate number of retainer bars and kep-nuts to complete the installation of PVC strip on the length of hardware ordered.

Jamb Mount is installed inside the doorframe. It mounts directly to the doorjamb. Jamb mount hardware is less common because it extends into the door opening and effectively reduces the door height. Jamb mount is often used with threaded rod to suspend strip doors from the ceilings of factories and warehouses. The hardware includes an appropriate number of retainer bars and kep-nuts to complete the installation of PVC strip on the length of hardware ordered.

Slide Mount hardware is also designed for installation above the doorway. The difference is that it is supplied with a Box Rail that extends past the opening and allows the strip door to be rolled to one or both sides of an opening. The slide mount hardware provided with a slide mount door includes the box rail, the Slide Mount Strip Door Hardware, the hangers that connect the strip door to the box rail, and box rail end caps or stops. The hardware includes an appropriate number of retainer bars and kep-nuts to complete the installation of PVC strip on the length of hardware ordered.

Press-Loc Mount lets you create your own barriers with lengths of Press-Loc fastener. One side of the fastener has industrial strength pressure sensitive adhesive to attach the fastener to the PVC strip or doorway. The other side is the unique Press-Loc interlocking surface. Press two pieces together and... voilà!...Press-Loc. Order twice the length you need to have enough for both sides.

Pipe Mount hardware is a system of fittings that uses locally available galvanized 1½" ID Schedule 40 pipe (approximately 1.9" OD) to build a wide variety of PVC strip barriers and enclosures. It can be free-standing or can be attached to existing walls. The system uses galvanized steel hanger clips to attach any width or kind of PVC strip to Schedule 40 pipe. Hanger clips feature studs on 2" centers that match the configuration of cut and punched strips. Three hanger clips are needed for each foot of strip. Cast fittings join cross-members and uprights to create almost any configuration of enclosure.

Stand-off Mount allows for installation of a strip door for a doorway where there is an existing conventional roll-up door. The Stand-off hardware brackets are installed on either side of the roll-up door hardware. They are available in three stand-off depths 12", 18", and 24" to suit the amount of clearance required for the existing door. Doors ordered with stand-off mount hardware include strip material to cover the side of the stand-off bracket. Stand-off mount hardware includes one left-hand bracket, one right-hand bracket, and a length of C-channel front mounting bar. The brackets and front mounting bar are shipped with strip door mounting hardware already attached, so there is no other hardware to purchase. Bolts are provided for attaching the C-channel to the brackets. Fasteners to attach the brackets to the wall are not included. The hardware includes an appropriate number of retainer bars and kep-nuts to complete the installation of PVC strip on the length of hardware ordered.